![]() |
![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() |
||
|
|
Click here to view and/or print the original catalog page (If you cannot view the document, click here to get Adobe Reader for free)
Additive | Accelerator ALL TEMP NON-CHLORIDE
MANUFACTURER: PRODUCT DESCRIPTION: ALL TEMP NON-CHLORIDE is a multi-purpose admix for concrete and mortar that does not contain chlorides. It is designed to accelerate the set time, as well as to densify, harden, improve the workability, and increase the strength development of finished mixes, thereby improving their water resistance and dust proofing qualities. ALL TEMP NON-CHLORIDE can be safely used with gray or white Portland Cement or colored masonry products without causing discoloration. Unlike traditional chloride based admixtures, ALL TEMP NON-CHLORIDE is non-corrosive and will not promote additional efflorescence. USES:
INSTALLATION: Mixing: Curing: Packaging: Color:
SUGGESTED PROPORTIONS: Concrete: Never use more than 2 gallons per cubic yard of concrete. When temperature is below or expected to fall below 25EF in the 24 hour period following placement of material, supplemental heating of gauging water is essential. At these lower temperatures, work should be additionally protected. Premixed Gravel Mix (80 lb. bag): Masonry (Portland-Lime Mortars): Masonry (Cement Mortars): When temperature is below or expected to fall below 25EF in the 24 hour period following installation of brick or cement mortar applications, supplemental heating of gauging water and dry ingredients must be used. Protect finished work from wind and rain for 24 hours after installation. Stucco, Masonry Paints, Tile Grouts and Other Cement Based Material: TECHNICAL DATA: Empire Blended ALL TEMP NON CHLORIDE meets ASTM specification C-494 for Type C Accelerating Admixtures. LIMITATIONS: Never combine ALL TEMP NON CHLORIDE with other admixtures. Never add ALL TEMP NON CHLORIDE directly to the mix. It must be mixed with water and then introduced to the mix or balling can occur. Sand and aggregate used must be free of ice. Protect from freezing. CAUTION: Contains Ethylene oxide-nonylphenol polymer CAS # 9016-45-9 and Sodium Thiocyanate CAS #540-72-7. May cause eye, skin and respiratory irritation. Avoid contact with eyes, skin and clothing. Do not take internally. If ingested, do not induce vomiting and get prompt medical attention. If any product gets into the eye, rinse immediately and repeatedly with water. If skin contact occurs, flush affected areas with plenty of water. Remove and wash contaminated clothing before reuse. Keep out of reach of children. WARRANTY: Due to the use of this product beyond our control, we assume no liability for damages of any kind, and the user accepts the product "as is" and without warranties, expressed or implied, from either Empire Blended Products or its agents. The suitability of the product for an intended use shall be solely up to the user. Our only obligation shall be to replace or pay for any material proved defective, with our liability limited to the purchase price of materials supplied by us.
Click here to view and/or print the original catalog page (If you cannot view the document, click here to get Adobe Reader for free)
|
|
Copyright © Empire Blended Products,
2003 |
||